FR5 parts Epoxy parts insulation parts Electrical parts
Model No.︰FR5
Brand Name︰FOUND
Country of Origin︰China
Unit Price︰US $ 1 / pc
Minimum Order︰100 pc
Product Description
|
No. |
Item |
Units |
Value |
|
FR5 Parts |
|||
|
1 |
Applicable Standards |
— |
NEMA LI 1-1998 |
|
2 |
Density |
g/cm³ |
1.80～2.00 |
|
3 |
Min. Flexural,Thick 0.5″ Lengthwise: Crosswise: |
ksi |
45 35 |
|
4 |
Min.Izod Impact Strengt,Thick 0.5″ Lengthwise: Crosswise: |
Ft-lb/in (notch) |
7.0 5.5 |
|
5 |
Min. Insulation Resistance C-96/35/90 |
Ω |
2×1011 |
|
6 |
Max. Permittivity,Thick 0.5″ A D-24/23 |
— |
5.2 5.4 |
|
7 |
Max. Dissipation Factor,Thick 0.5″ A D-24/23 |
— |
0.025 0.035 |
|
8 |
Min. Breakdown Voltage,Thick 0.5″ A D-48/50 |
kV |
45 40 |
|
9 |
Min. Bonding Strength,Thick 0.5″ A D-48/50 |
lbs |
1600 1500 |
|
10 |
Max. Water Absorption,Thick 0.5″ |
% |
0.10 |
|
11 |
Flammability |
UL94 |
V0 |
|
12 |
Temperature index |
℃ |
155 |
specifications︰ 1-2000mm
Advantages︰ FR5 parts extremely high mechanical strength (flexural,impact,and bonding) at room temperature,good dielectric loss and electric strength properties under both dry and humid conditions.This material is normally used for electrical and electronic insulation applications where low moisture absorption and high physical strength are needed.exhibits good organic solvent resistance and fair to poor resistance to acids and alkalies,heat resistance is fair where physical stress is not imposed,not recommended for wear applications.
Product Image
